info@semost.com

Silicone for Body Parts

  • semost- Medical grade silicone
semost- Medical grade silicone

semost- Medical grade silicone

  • Product Item: SE-805#,SE-810#
  • Hardness:5~10 Shore A
  • Mix Ratio: 1:1
  • Color: Skin/ Custom color
  • Product description: SE-805# & SE-810# silicone rubber is platinum cure siliconebased on medical grade certificated. It is two-components silicone rubber, it will be cured under room temperature and can be cured fastly by
  • INQUIRY


Description:

SE-805# & SE-810# silicone rubber is platinum cure silicone rubber (or called addition cure silicone rubber) based on medical grade certificated. It is two-components silicone rubber, it will be cured under room temperarure and can be cured fastly by heating. The product is colorless or skin-colored oily liquid and becomes soft elastic material after vulcanization.



Characteristics:

- Medical grade, totally non-toxic, odorless, harmless, and eco-friendly
- Flesh tone color, skin color
- High elasticity; good tensile strength and tear strength
- Very suitable hardness
- Low shrinkage less than 0.1%
- Long service life of 5 years
- Good flexibility, permeability and easy operation
- Excellent UV-irradiation resistance and aging resistance


Applications:

The application would be used for making soft silicone rubber products like human body shape, breast pad making, bra pads, silicone breast and prosthesis, shoulder pads, patch, anti slip mat, anti-skid pad, silicone scar sheet, silicone dolls filling, bra filling, artificial vagina, etc.


Datesheet:

Model NO· SE-805# SE-810#
Mixing Ratio (by weight) 1:1 1:1
Appearance/Color skin color skin color
Hardness (Shore A) 5±2 10±2
Mixed viscosity (mPa·s) 4000±500 1300±500
Working Time(at23/75,MINS) 30~40 30~40
Curing Time (at 23/75, HRS) 4~5 4~5
Tensile strength, Mpa ≥3.4 ≥3.6
Tear strength, KN/m ≥12.7 ≥14.8
Shrinkage, % <0.1 <0.1
Elongation at break, % ≥500 ≥520


Using instructions:

Step 1: Prepare and clean the prototype.
Step 2: Mixing part A and part B of our silicone rubber evenly according to the mixing ratio of 1:1 or 10:1.
Step 3: After mixed the silicone evenly, it is better to release the bubble by vacuum pumping.
Step 4: Pouring cast

Notes: Please finishes all the steps within the operation time. If not, it will cause cross linking reaction, and no more further steps will be available. So, we have to pay attention to the pot life and curing time.